MediaWiki API result
This is the HTML representation of the JSON format. HTML is good for debugging, but is unsuitable for application use.
Specify the format parameter to change the output format. To see the non-HTML representation of the JSON format, set format=json.
See the complete documentation, or the API help for more information.
{
"batchcomplete": "",
"continue": {
"lecontinue": "20240205232845|65",
"continue": "-||"
},
"query": {
"logevents": [
{
"logid": 75,
"ns": 6,
"title": "File:Copy-Payment-Link-Close-Up.jpg",
"pageid": 42,
"logpage": 42,
"params": {},
"type": "create",
"action": "create",
"user": "Tkb13",
"timestamp": "2025-04-02T17:04:02Z",
"comment": ""
},
{
"logid": 74,
"ns": 6,
"title": "File:Copy-Payment-Link-Close-Up.jpg",
"pageid": 42,
"logpage": 42,
"params": {
"img_sha1": "sc14a0qucyvj4kooivo99j6s8wzrtme",
"img_timestamp": "2025-04-02T17:04:02Z"
},
"type": "upload",
"action": "upload",
"user": "Tkb13",
"timestamp": "2025-04-02T17:04:02Z",
"comment": ""
},
{
"logid": 73,
"ns": 6,
"title": "File:Formal Quote Creation.png",
"pageid": 41,
"logpage": 41,
"params": {},
"type": "create",
"action": "create",
"user": "Skn13",
"timestamp": "2025-03-17T17:33:34Z",
"comment": ""
},
{
"logid": 72,
"ns": 6,
"title": "File:Formal Quote Creation.png",
"pageid": 41,
"logpage": 41,
"params": {
"img_sha1": "pnb3d409de4c4kpapg02oka08emzs4n",
"img_timestamp": "2025-03-17T17:33:34Z"
},
"type": "upload",
"action": "upload",
"user": "Skn13",
"timestamp": "2025-03-17T17:33:34Z",
"comment": ""
},
{
"logid": 71,
"ns": 0,
"title": "Competition rules and procedures",
"pageid": 40,
"logpage": 40,
"params": {},
"type": "create",
"action": "create",
"user": "Tkb13",
"timestamp": "2024-04-27T18:24:47Z",
"comment": "Created page with \"= Organization and format = The competition will have an identified '''coordinator''' who is in charge of flow and processes. If 5 or fewer bots, then format is '''round robin''', with more bots, it's '''double elimination.''' Note: the coordinator should make or acquire a trophy for the winner. Putting this at the top so you don't forget. If you do, make one out of foundry stuff. = Check-in and safety inspection = All teams with bots competiting must check in with th...\""
},
{
"logid": 70,
"ns": 2,
"title": "User:Wjn7",
"pageid": 0,
"logpage": 0,
"params": {
"userid": 6
},
"type": "newusers",
"action": "autocreate",
"user": "Wjn7",
"timestamp": "2024-03-30T16:40:21Z",
"comment": ""
},
{
"logid": 69,
"ns": 2,
"title": "User:Skn13",
"pageid": 0,
"logpage": 0,
"params": {
"userid": 5
},
"type": "newusers",
"action": "autocreate",
"user": "Skn13",
"timestamp": "2024-02-06T18:26:07Z",
"comment": ""
},
{
"logid": 68,
"ns": 0,
"title": "Extending the flat on N20 motors",
"pageid": 39,
"logpage": 39,
"params": {},
"type": "create",
"action": "create",
"user": "Tkb13",
"timestamp": "2024-02-05T23:33:45Z",
"comment": "Created page with \"[[File:N20 shaft, all flat.png|thumb|Your motor should look like this: N20 shaft, all flat. ]] [[File:N20 shaft, partial flat.png|thumb|If your motor looks like this, you're in the right place to fix it: N20 shaft, partial flat]] If your motor flat doesn't go the full length of the shaft (i.e., it looks like the red angry face picture to the right), this is how to fix that! You just need to extend that flat with a hand file or rotary tool (e.g. Dremel). Here's a video...\""
},
{
"logid": 67,
"ns": 6,
"title": "File:N20 shaft, partial flat.png",
"pageid": 38,
"logpage": 38,
"params": {},
"type": "create",
"action": "create",
"user": "Tkb13",
"timestamp": "2024-02-05T23:29:25Z",
"comment": ""
},
{
"logid": 66,
"ns": 6,
"title": "File:N20 shaft, partial flat.png",
"pageid": 38,
"logpage": 38,
"params": {
"img_sha1": "l3lj84pt2rdf67vovvvlh0p5emy7cb9",
"img_timestamp": "2024-02-05T23:29:24Z"
},
"type": "upload",
"action": "upload",
"user": "Tkb13",
"timestamp": "2024-02-05T23:29:24Z",
"comment": ""
}
]
}
}